Quality Manufacturers of Industrial Doors

SECTIONAL OVERHEAD DOORS

SPECIFICATIONS

PANEL CONSTRUCTION

Insulated door panels are constructed from galvanised steel sheets bonded together with CFC free polyurethane foam with integral thermal breaks to provide a U value of 0.40 w/m2C.
The combined effect of the panel insulation properties together with the effect of the thermal bridges to panel joints results in an overall U value of 0.60w/m2C.Sectional Overhead Door

* This value exceeds Building Regulation requirements.
* Standard panel finish is White polyester stucco both sides.
* HP200 Plastisol or architectural Polyester standard colours are available.

END CAPS

Each panel is fitted with galvanised punched end caps to accept adjustable roller carriers and rollers. The rollers generally have a steel shaft, nylon running surface and ball race bearing.

HINGES

Each door panel is connected to its adjoining panel by the side hinge roller carriers and intermediate hinges at approximate 1000mm centres.

TRACKS

Cold rolled galvanised steel tracking is preformed in pairs to ensure smooth operation. Spring buffers are provided to the back tracks to help ensure operating cables are always tensioned Track configuration can be calculated to suit individual building elevations and clearances, whether standard, high lift or vertical lift.

SPRINGS


Springs are calculated to suit the weight and configuration of each door and are fitted to a solid steel shaft. Grooved aluminium cable drums are fitted to the ends of the shaft.

SEALS

Flexible rubber seals are fitted to all four sides. The top seal compresses against the lintel and bottom seals to the threshold.

FURNITURE

All manual doors are supplied with footstep handle & spring loaded shoot bolt.

OPERATION

Generally doors over 3000mm x 3000mm come with chain hoist. Smaller doors are provided with pull chain. Electric push button operation from either single or 3 phase supply. A full range of activation methods is available.

SAFETY

As standard a cable break and spring break devices are fitted in compliance with BS EN-13241.

OPTIONS

* Square or oval cornered double glazed vision windows of various dimensions.
* Bottom stop & return safety edge.
* Wicket doors.

Technical Drawings

Standard Lift Track
High Lift Track
Vertical Lift Track
Low Lift Track
Industrial Door Services Limited

Adelaide Street
Crindau Park
Newport
Gwent
NP20 5NF

T: 01633 853335
F: 01633 851989
Email Us

Contact us for more information

Industrial Door Services Limited

Unit K
Eagle Close
Chandlers Ford Ind Est
Eastleigh,
Hampshire
SO53 4NF

T: 02380 255255
F: 02380 255277
Email Us